76mm base flexible PVR D Fender designed to provide protection to boats and other marine areas.
Manufactured in a UV stabilised, phthalate free, and 100% recyclable compound, our products are as kind to the environment as possible whilst delivering excellent in use performance.
Our non-marking PVC material provides the perfect alternative to rubber D fendering which is prone to leaching its colour on both your own boat as well as those around you.
Base size: 76mm
Material: PVC - UK manufacture
- Technical Datasheets
- Ask a Question
Product QuestionsQuestion by: fred on 27 Mar 2018 17:49:00Hi Fred,
You are correct, the cord is cut to the required length to provide a plug to cover the fixings.
Further details can be found in our fixing guide: https://www.wilks.co.uk/index.php/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1424179299.pdf
Please do not hesitate to contact us should you have any further questions.
The Wilks TeamAnswer by: Wilks Team (Admin) on 3 Apr 2018 12:12:00Hi, can you use self tapping screws on aluminium for fitting?
Up to what size boat, tonnage is the 76mm rub rail effective?
How does it compare to the 80mm?
I run a jet 11m jet boat on the Thames commercially. We dock against metal piers. Which would be best suited for my boat, without overkill?Question by: Philip Otto on 28 Mar 2017 20:01:00Dear Phillip,
PVR 72 (76mm Base) has walls of 11mm thick and a standoff height of 40mm, compared to PVR 63 ( 80mm base) which has walls of 15mm and a standoff height of 63mm. The PVR 72 will compress at a lower impact due to the thinner walls and is more suitable for a lighter boat. The PVR 63 is for heavier boats operating in a more commercial environment.
A rigid PVC strip or other backing strip should be fitted inside the D-Section as per our D-Section fitting instructions.
Fixings need to be suitable for the application and substrate. As you have an aluminium boat you will need to consider the electrolytic action between the aluminium whole and the stainless fastenings. Using a product like Duralac on the stainless fasteners stops this. As this is a commercial application I would bolt where ever access is possible.
Please do not hesitate to contact us with any further questions you may have.
The Wilks TeamAnswer by: Wilks Team (Admin) on 29 Mar 2017 13:10:00Question by: Phill Channing on 9 May 2015 19:34:00PVR 72 can be fitted to a 45mm radius but nominal flattening will occur to the curved face of the D profile.
A radius of 130mm will ensure that no flattening occurs.
Should you have any further questions then please do not hesitate to contact us.Answer by: Wilks Team (Admin) on 11 May 2015 12:12:00